Digiplex EVO641R Manual de instalación descargar pdf (Pagina 7)

Modules Programming Guide - 7

‡ Section/option is only available with EVO641.

Only Event Groups 000 to 055 and 070 can be used to program the module’s PGM. Refer to Appendix 1: Programming PGMs on page 52

for the PGM Table.

Message Programming

Each section from [101] to [148], [200] to [204] and [301] to [396] contains one message with a maximum of 16 characters. The sections

contain the following messages:

Sections [101] to [148] = “Zone 01” to “Zone 48” respectively

Section [200] = “Paradox Security”

Sections [201] to [204] = “First Area”, “Second Area”, “Third Area”, and “Fourth Area”

Sections [301] to [396] = “Code 01” to “Code 96” respectively

After entering the section corresponding to the desired message, the message can be re-programmed to suit your installation needs as

detailed in Table 1. For example, section [101] “Zone 01” can be changed to “FRONT DOOR”.

Use WinLoad to program a message for zones 49 to 192 and for codes 97 to 999 respectively.

Table 1: Message Programming Special Function Keys

Table 2: Alphanumeric Keys

Sections ‡ PGM Activation Event

[009] __/__/__ Event Group

[010] __/__/__ Feature Group

[011] __/__/__ Start #

[012] __/__/__ End #

Sections ‡ PGM Deactivation Event

[013] __/__/__ Event Group

[014] __/__/__ Feature Group

[015] __/__/__ Start #

[016] __/__/__ End #

Key Function Details

[stay] Insert Space Press the [

STAY] key to insert a blank space at the current cursor’s position.

[force] Delete Press the [

FORCE] key to delete the character or blank space found at the current cursor’s position.

[arm] Delete Until the End

Press the [

ARM] key to delete all characters and spaces to the right of the cursor and at the cursor’s

position.

[disarm] Numeric/

Alphanumeric

Press the [

DISARM] key to toggle the numeric keys to alphanumeric keys and vice versa. Numeric: Keys

[0] to [9] represent numbers 0 to 9. Alphanumeric: refer to Table 2 below.

[byp] Lower/Upper Case Press the [

BYP] key to toggle from lower to upper case and vice versa.

[mem]

Special Characters After pressing the [

MEM] key, the cursor will turn into a flashing black square. Using Table 3 below, enter

the 3-digit number for the desired character.

Key Press Key Once Press Key Twice Press Key Three Times

[1]ABC

[2] D E F

[3] G H I

[4] J K L

[5] M N O

[6] P Q R

[7] S T U

[8] V W X

[9] Y Z N/A

1 2 3 4 5 6 7 8 9 10 11 12 ... 59 60

Comentarios a estos manuales

Sin comentarios

Digiplex EVO641R Manual de instalación Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digiplex EVO641R