Digiplex EVO641R Manual de instalación descargar pdf (Pagina 44)

44 - Modules Programming Guide

Magellan Wireless Expansion Module (MG-RTX3)

Digital Ceiling Mounted Motion Detector Module (DG467)

4-PGM Expansion Module (APR3-PGM4)

8-Zone Expansion Module (APR-ZX8)

ERROR (Red): Indicates a problem with

the module.

BUS RX (Green): Flashes when receiving

information from the

panel.

BUS TX (Red): Flashes when transmitting

information to the panel.

RF RX(Green): Flashes when receiving

wireless information.

RF TX(Yellow): Flashes when transmitting

wireless information.

Connect to any device such as a

garage door, light or siren.

Connect to an external Power

Supply (PS-17 recommended)

Use a relay if the

current draw will

exceed 150mA.;

System Reset: Press and hold

the Programming button for 5

seconds, the BUS RX LED will

flash. Release the button and

press it again while the LED

flashes to reset the module to its

default values. This is only

possible in the first 30 seconds

after the MG-RTX3 is powered

up.

Anti-Tamper Switch

Refer to Module Connection Drawings on

page 39 for information.

Refer to PGM Connection

for connection information.

Connect to a 307USB and use WinLoad’s In-Field

Firmware Upgrade Application to upgrade the

firmware

To close unit, align

PCB arrow with

cover arrow

Anti-Tamper Switch

Power Input 12Vdc

Combus (J4 ON)

Alarm Relay

Refer to Module Connection

drawings on page 39 for information.

Connect the detection devices to the APR-ZX8

input terminals exactly as shown in the control

panel Reference & Installation Manual.

Pressing the

"Disable

Locate" switch

will disable a

"Locate"

request coming

from the control

panel.

Input terminal Z8

can be used as an

anti-tamper switch

input Option [1]:

Section [001]

External

Anti-

Tam pe r

Switch

(N.C.)

Refer to Module Connection drawings on

page 39 for information.

Open Collector

(Negative Trigger)

12 Vdc 50 mA

To drive more than

50mA

use a 12Vdc relay

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 59 60

Comentarios a estos manuales

Sin comentarios

Digiplex EVO641R Manual de instalación Pagina 44

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digiplex EVO641R