Digiplex EVO641R Manual de instalación descargar pdf (Pagina 40)

40 - Modules Programming Guide

Grafica Graphic LCD Keypad Module (DNE-K07)

Please Note: The Grafica keypad is best

viewed at an angle between 20° and -10°.

Mounting the Metal Wall

Plate

1) Place the wall plate to

desired position.

2) Drill and insert screws

into holes labelled “A”.

Mounting Grafica to the Wall

Plate

1) Place Grafica’s back plate

flush against the mounted

metal wall plate.

2) Slide Grafica’s open slots

labelled “D” onto the metal

wall plate’s tabs labelled

“B”.

3) Gently apply downward

pressure to snap Grafica

onto the metal wall plate.

4) If necessary, insert an

optional screw in the

space provided on the

metal wall plate’s left tab.

Please Note:

Grafica’s keypad

cover requires a

minimum clearance

of 9cm (3.5in).

Combus

To Digiplex control panel

EVO48 & EVO192

Grafica (partial view)

To other

modules

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 59 60

Sin comentarios

Digiplex EVO641R Manual de instalación Pagina 40