Digiplex DGP-641 Manual de instalación Pagina 53
- Pagina / 68
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
DGP-848 Control Panel 49
16.10 Event Record Display
The Event Record Display can only be viewed through an LCD or
Grafica keypad. The Event Record Display will record the user-
initiated actions that occurred in the system as well as any alarms
or troubles.
For example, when a valid code is entered, the user access code
and the action taken (arm, disarm, etc.) is recorded.
You have the choice of viewing the events in all the partitions at
once or by individual area. In either case the most recent event is
displayed first Figure 25 on page 49.
For LCD keypads:
To view the events, users:
1) Enter their [
ACCESS CODE].
2) Press the [7] key.
3) Press the [0] key for all partitions.
Press the [1] key for Partition 1.
Press the [2] key for Partition 2.
Press the [3] key for Partition 3.
Press the [4] key for Partition 4.
4) Use the [
T] key to view subsequent events.
5) Press the [CLEAR] key to exit.
Once you have entered the Event Record Display, you can change
the order that the Event Record screens (see Figure 25: Event
Record screens) appear by pressing the [7] key. If you already
know the number of the event you want to view, press the
[MEM]
key and then enter the event's number.
Figure 25: Event Record screens
For Grafica keypads:
To view the events, users:
1) Enter their [
ACCESS CODE].
2) Using the scroll keys, highlight View Status and then press
the center action key (Ok).
3) Highlight View Events and then press the center action key
(Ok). If the event list appears on the screen go to step 6.
4) Highlight View All Areas or Select Area(s) and then press the
center action key (Ok).
5) If you selected Select Area(s) in step 4, highlight the area you
wish to view and then press the center action key (Ok).
6) Use the scroll keys to scroll through the events.
Identification screens
The date and time
the event occurred.
Event screens
The event(s) that occurred.
Area where the
event occurred.
The number of
the event
- Table of Contents 3
- Introduction 5
- Installation 6
- DGP-848 Control Panel 3 7
- BELL output has 8
- AUX. OUTPUT = 700mA 9
- 2.9 Programmable Outputs 10
- 2.10 Combus Connections 10
- 2.11 Single Zone Connections 10
- 2.12 Double Zone Connections 11
- 2.13 Keypad Zone Connections 11
- 2.14 Keyswitch Connections 11
- 2.15 Fire Circuits 11
- ENTER] (LCD keypads) or [ 12
- Programming Methods 13
- 3.6 Level Programming 14
- 3.7 Paradox Memory Key 14
- Zone Programming 15
- 4.1 Zone Numbering 16
- 4.2 Zone Definitions 16
- 4.3 Zone Partition Assignment 17
- 4.4 Zone Options 17
- 4.5 Zone Labels 18
- DGP-848 Control Panel 15 19
- 4.6 Input Speed 20
- 4.7 EOL Zones 20
- 4.8 Zone Doubling (ATZ) 20
- Keyswitch Programming 21
- 5.2 Keyswitch Definitions 22
- 5.4 Keyswitch Options 22
- 6.1 Arming Follows Partition 23
- 6.3 No Arming On Tamper 23
- 6.5 Timed Auto-Arming 23
- 6.6 No Movement Auto-Arming 24
- 6.7 Auto-Arming Options 24
- 6.8 One-Touch Features 24
- 6.9 Exit Delay 24
- 6.10 Keypad Lock-out Feature 24
- ECTIONS [238] TO [241] 25
- ECTION [504]: OPTION [5] 25
- Alarm Options 26
- 7.5 Keypad Panic Options 27
- Event Reporting 28
- 8.1 Reporting Enabled 29
- 8.2 Report Codes 29
- 8.4 Partition Account # 31
- 8.5 Reporting Formats 31
- 8.6 Event Call Direction 31
- Dialer Options 33
- Programmable Outputs 34
- 10.2 PGM Deactivation Event 35
- 10.3 PGM Deactivation Option 35
- 10.4 PGM1 Is Smoke Input 35
- PGM Programming Table 36
- DGP-848 Control Panel 33 37
- (when system is 38
- (Tamper/Fire Loop) 38
- (Low Battery 38
- Supervision) 38
- 12.1 Hardware Reset 39
- 12.2 Software Reset 39
- 12.3 Battery Charge Current 39
- DGP-848 Control Panel 37 41
- Access Codes 42
- 13.5 User Options 43
- 13.7 Access Control 43
- 13.8 Multiple Action Feature 44
- Access Control 45
- 14.6 Access Levels 46
- 14.7 Schedules 46
- 14.8 Holiday Programming 46
- DGP-848 Control Panel 43 47
- WinLoad Software 48
- User Features 49
- 16.2 Bypass Programming 50
- 16.3 Chime Zones 50
- 16.4 Access Codes 50
- 16.6 Keypad Settings 51
- 16.7 Trouble Display 51
- 16.8 Trouble Latch 52
- 16.9 Clear Bell Limit Trouble 52
- 16.10 Event Record Display 53
- 1.0 INSTALLATION 54
- 2.0 PROGRAMMING 55
- 3.0 SYSTEM OPTIONS 55
- 641BL ONLY) 57
- 6.0 MESSAGE PROGRAMMING 59
- Table 14: Message Programming 59
- 7.0 PROGRAMMING SECTIONS 60
- DGP-848 Control Panel 57 61
- DGP-848 Control Panel 59 63
- Warnings 64
- FCC Warnings 64
- CTR-21 Warnings 64
- General Warning 64
- UL and C-UL Warnings 64
- Warranty 65
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digiplex DGP-641
(60 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.039 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales