Digiplex DGP2-648BL Manual de usuario descargar pdf (Pagina 9)

Digiplex LED Keypad 5n

3.0 Partitioned System

Your installer can set your keypad to recognize separate protected

areas. A separated system is called a partitioned system, which can be

useful in situations where shared security systems are more practical.

For example, a company that has both an office and a warehouse

area, can arm and disarm each area separately while controlling

access to each area. Therefore, one person may have access to only

one area, whereas another person may have access to all areas.

Access to the areas is determined by the User Access Code.

3.1 Area Display

The Area Status Display enables you to see the status of the individual

areas within a partitioned system (see section 3.0). Depending upon

which system you have, your installer can partition the system into

separate areas. Your keypad can be programmed to display up to four

areas. These areas are indicated as area lights A1 to A4.

Your keypad will emit a Confirmation Beep and remain in

that area’s status for two minutes then return to Normal or

Confidential Mode. You can perform the next desired action

from Area Status Display.

How do I see the status of the areas?

1) Enter your [

ACCESS CODE].

2) Press the [

AREAS] button (the [1] button).

3) Press the key corresponding to the area you want to view. Open

zones assigned to the area will illuminate and display their status

(Figure 1 on page 2). If your installer has enabled Multiple-action,

you will be able to check the status of several areas without re-

entering your [

ACCESS CODE]. See "Multiple-action" on page 4.

4) Press the [

CLEAR] key to exit.

DGP2648_EU08.fm Page 5 Friday, September 29, 2006 2:43 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 43 44

Sin comentarios

Digiplex DGP2-648BL Manual de usuario Pagina 9