Digiplex DGP2-648BL Manual de usuario descargar pdf (Pagina 18)

14 User Manual

5.9.1 Bypass Recall

The Bypass Recall feature enables you to bypass the same zones

that were bypassed previously at the touch of a key.

How do I bypass a zone?

1) Enter your [

ACCESS CODE]. Your keypad will emit a Confirmation

Beep and the A

CCESS action light will flash.

2) Press the [

BYP] key. The PRG action light will illuminate and the

YP action light will flash.

3) Enter the two-digit number(s) of the zone(s) you want to bypass

and the corresponding number(s) will illuminate. If a zone’s

number is illuminated and you reenter its number, the zone will

unbypass and the number will extinguish.

If a zone’s number does not illuminate and your keypad emits a

Rejection Beep, the zone may not have the Bypass feature accessible.

4) Press the [

ENTER] key to save and exit. The BYP action light will

remain illuminated to indicate that zones are bypassed.

How do I activate Bypass Recall?

1) Enter your [

ACCESS CODE]. Your keypad will emit Confirmation

Beep and the A

CCESS action light will flash.

2) Press the [

BYP] key. Your keypad will emit a Confirmation Beep and

the P

RG action light will illuminate. The BYP action light will also flash.

3) Press the [

MEM] key. All zones (numerical lights) bypassed during the

last time the system was armed will illuminate and will be bypassed.

4) If you wish, reenter the zone’s number to change a bypassed

zone to an unbypassed zone and vice versa.

5) Press the [

ENTER] key to exit.

DGP2648_EU08.fm Page 14 Friday, September 29, 2006 2:43 PM

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

Sin comentarios

Digiplex DGP2-648BL Manual de usuario Pagina 18