Digiplex DGP2-648BL Manual de usuario descargar pdf (Pagina 19)

Digiplex LED Keypad 15n

6.0 Disarming

When the system is disarmed, the system deactivates the zones so

the alarm will not be triggered if zones are breached. Any user can

disarm the system unless their code has been assigned the Arm

Only option.

24hr. zones/Fire Zones are always active (enabled),

therefore will always generate an alarm if triggered.

6.1 Entry Delay Timer

Based on your instructions the installer will program designated entry

points, such as the front door or the garage door, with an entry delay.

This delay will allow you enough time to enter your code to disarm

the system before the alarm is triggered.

6.2 Disarming an Armed System

You will only be able to disarm the area to which your User Access

Code is assigned. User Access Codes with the Arm Only option will

not be able to disarm the system.

Use One-Touch keys (see section 5.6) or a keyswitch (see

section 5.7) to disarm the area.

How do I disarm the system?

1) Enter your [

ACCESS CODE].

2) Press the [

DISARM] button. If you have access to more than one

area, select the area(s) you wish to disarm.

How do I disarm a system in alarm?

1) Enter your [

ACCESS CODE].

2) Call your security company quickly to advise them of the alarm.

DGP2648_EU08.fm Page 15 Friday, September 29, 2006 2:43 PM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

Sin comentarios

Digiplex DGP2-648BL Manual de usuario Pagina 19