Digiplex DGP2-648BL Manual de usuario descargar pdf (Pagina 16)

12 User Manual

5.8 Auto-Arming

You can program one or more areas to arm automatically. Ask your

installer for details.

5.8.1 Timed Auto-Arming

You can set the time that an area will arm itself automatically.

If you have access to more than one area, the symbol(s)

corresponding to the area(s) for which you have access will

illuminate in sequence. Press the number key representing

the area you want to arm. To view the time set, instead of

entering the time in Step 4, the first number of the time you

set will illuminate. Press the [

U] key to illuminate the

numbers one at a time (numerical light 10 represents zero).

How do I set the Auto-Arming timer?

1) Enter your [

ACCESS CODE]. Your keypad will emit a Confirmation

Beep and the A

CCESS action light will flash.

2) Press the [0] key. Your keypad will emit a Confirmation Beep,

and the P

RG action light and area light(s) will flash.

3) Press the [

MEM] key. The PRG action light will flash and the MEM

action light will illuminate (see note on page 15).

4) Enter the time that you want the area to arm. Set the time

according to the 24-hour clock (i.e. 9 a.m. is 09:00 and 9 p.m. is

21:00).

The M

EM action light will flash if a time is not already programmed.

The P

RG action light, the area light of the chosen area, and the first

number of the previous time set will illuminate (10 light = zero).

5) Press the [

ENTER] key to save and exit.

DGP2648_EU08.fm Page 12 Friday, September 29, 2006 2:43 PM

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 43 44

Sin comentarios

Digiplex DGP2-648BL Manual de usuario Pagina 16