Digiplex DGP2-648BL Manual de usuario descargar pdf (Pagina 26)

22 User Manual

assigned. When entering User Programming, the Area LEDs will

illuminate to show you which areas you have access to. When you

begin programming, the numerical LEDs 1 to 4 will illuminate and

correspond to areas assigned to LEDs A1 to A4 respectively.

Table 2: Area Assignment

In Table 1 and Table 2 the User Code Option or Area is

considered “ON” when the corresponding numerical light is

illuminated. You turn the numerical lights “ON” and “OFF” by

pressing the numerical keys on your keypad. When the

area's number is “OFF”, the User Access Code does not

have access to that protected area.

7.4 Erasing Access Codes

To delete existing Access Codes, press the [CLEAR] key in steps 5, 6,

and 7 in on page 18. Once the information is erased, press the

[

ENTER] key to save and exit.

7.5 Keypad Lock-Out

If a consecutive number of invalid codes are entered on your keypad,

the installer can program the system to lock out access from the

keypad for a specified period of time.

Press Key ON/OFF Area Assignment

[1] ON (default) Access to Area 1

[2] ON Access to Area 2

[3] ON Access to Area 3

[4] ON Access to Area 4

All keys OFF Controls PGMs only (if PGMs are

programmed by the installer).

DGP2648_EU08.fm Page 22 Friday, September 29, 2006 2:43 PM

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 43 44

Sin comentarios

Digiplex DGP2-648BL Manual de usuario Pagina 26