Digiplex DGP2-641R Manual de instalación descargar pdf (Pagina 14)

10 Reference & Installation Manual

4.0 SYSTEM OPTIONS

4.1 Partition Assignment

SECTION [001]: OPTIONS [1] TO [8]

Keypads in the system can be assigned to one or more partitions.

Options [1] to [8] represent partitions 1 through 8 respectively. To

assign the keypad to a partition, enable the option that corresponds to

the desired partition. By default, partitions 1 to 8 are enabled.

Section [001] options [5] to [8] can only be used if the keypad is

connected to a DGP-NE96 control panel.

4.2 Display Access Code Entry

SECTION [003]: OPTION [1]

The digits of the User Access Codes can be displayed on the LCD

screen when they are entered.

Option [1] OFF= Digits are replaced by a “*“ (default)

Option [1] ON = Access Code digits will be displayed

4.3 Display Exit Delay Timer

SECTION [003]: OPTION [2]

Based on the user's needs, an Exit Delay Timer will be programmed to

provide the user time to exit the partition before the system is armed.

The Exit Delay Timer's countdown can be displayed on the LCD screen.

Option [2] OFF= Will not display Exit Delay timer (default)

Option [2] ON = LCD screen will display Exit Delay timer

DGP2641R_ei00.fm Page 10 Thursday, July 22, 2004 4:16 PM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Sin comentarios

Digiplex DGP2-641R Manual de instalación Pagina 14