Digiplex DGP2-641BL Manual de instalación descargar pdf (Pagina 31)

Digiplex Modules Programming Guide - 31

Grafica Graphic LCD Keypad Module (DNE-K07)

Please Note: The Grafica keypad is best viewed at

an angle between 20° and -10°.

Mounting the Metal Wall Plate

1) Place the wall plate to

desired position.

2) Drill and insert screws into

holes labelled “A”.

Mounting Grafica to the Wall

Plate

1) Place Grafica’s back plate

flush against the mounted

metal wall plate.

2) Slide Grafica’s open slots

labelled “D” onto the metal

wall plate’s tabs labelled “B”.

3) Gently apply downward

pressure to snap Grafica onto

the metal wall plate.

4) If necessary, insert an

optional screw in the space

provided on the metal wall

plate’s left tab.

Please Note: Grafica’s

keypad cover requires

a minimum clearance

of 9cm (3.5in).

Combus

To Digiplex control panel

(DGP-848/DGP-NE96)

Grafica (partial view)

To other

modules

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Sin comentarios

Digiplex DGP2-641BL Manual de instalación Pagina 31