Digiplex DGP2-641BL Manual de instalación Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 48
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
Digiplex Modules Programming Guide - 15
Remote Control Programming
= These button combinations are not available with the MG-REM1 remote control and cannot be programmed.
Table 5: Remote Control Button Choice
*Since the Magellan PGMs are always enabled and are activated only with Magellan remote control buttons
and respectively, the Utility Key options pertain only to PGMs on other modules connected to the system. For
DGP-848 systems, refer to the PGM table (First Digit: 8) in the Digiplex DGP-848 Programming Guide. For
DGP-NE96 systems, refer to the PGM table (Event Group: 048; Feature Group: 000; Start #001 to End #005) in
the DGP-NE96 Programming Guide.
The Panic feature must be enabled in the control panel.
Only arming and disarming functions were investigated by UL.
Table 6: Hexadecimal Programming
Remote Control Assignment to the Receiver Remote Control Assignment
to a User Access Code
Remote Control Button Programming
(refer to Tables 5 and 6 below)
Section & User Name Section User # Section
( / )
( / ) (+ /+ )(+ / +)
[201] :____________________________________ [301] __/__/__ [401] ( __/__ ) ( __/__ ) ( __/__ ) ( __/__ )
[202] :____________________________________ [302] __/__/__ [402] ( __/__ ) ( __/__ ) ( __/__ ) ( __/__ )
[203] :____________________________________ [303] __/__/__ [403] ( __/__ ) ( __/__ ) ( __/__ ) ( __/__ )
[204] :____________________________________ [304] __/__/__ [404] ( __/__ ) ( __/__ ) ( __/__ ) ( __/__ )
[205] :____________________________________ [305] __/__/__ [405] ( __/__ ) ( __/__ ) ( __/__ ) ( __/__ )
[206] :____________________________________ [306] __/__/__ [406] ( __/__ ) ( __/__ ) ( __/__ ) ( __/__ )
[207] :____________________________________ [307] __/__/__ [407] ( __/__ ) ( __/__ ) ( __/__ ) ( __/__ )
[208] :____________________________________ [308] __/__/__ [408] ( __/__ ) ( __/__ ) ( __/__ ) ( __/__ )
[209] :____________________________________ [309] __/__/__ [409] ( __/__ ) ( __/__ ) ( __/__ ) ( __/__ )
[210] :____________________________________ [310] __/__/__ [410] ( __/__ ) ( __/__ ) ( __/__ ) ( __/__ )
[211] :____________________________________ [311] __/__/__ [411] ( __/__ ) ( __/__ ) ( __/__ ) ( __/__ )
[212] :____________________________________ [312] __/__/__ [412] ( __/__ ) ( __/__ ) ( __/__ ) ( __/__ )
[213] :____________________________________ [313] __/__/__ [413] ( __/__ ) ( __/__ ) ( __/__ ) ( __/__ )
[214] :____________________________________ [314] __/__/__ [414] ( __/__ ) ( __/__ ) ( __/__ ) ( __/__ )
[215] :____________________________________ [315] __/__/__ [415] ( __/__ ) ( __/__ ) ( __/__ ) ( __/__ )
[216] :____________________________________ [316] __/__/__ [416] ( __/__ ) ( __/__ ) ( __/__ ) ( __/__ )
[0] = Button disabled
[8] = Panic 2
[1] = Regular Arm
[9] = Panic 3
[2] = Stay Arm [A] = Smoke reset
[3] = Instant Arm [B] = Utility Key 1*
[4] = Force Arm [C] = Utility Key 2*
[5] = Disarm [D] = Utility Key 3*
[6] = Stay/Instant Disarm [E] = Utility Key 4*
[7] = Panic 1
[F] = Utility Key 5*
LCD keypads
[0] to [9] = values 0 to 9 respectively [
DISARM] = D
[
STAY] = A [BYP] = E
[
FORCE] = B [MEM] = F
[
ARM] = C [CLEAR] = Exit section without saving
[
ENTER] = Save current data and advance to next section
Grafica keypads
[0] to [9] = values 0 to 9 respectively Right Action Key (Exit) = Exit section without saving
[#]
= A to F (press the [#] key until
the desired letter appears)
Center Action Key (Save)
= Save current data and
advance to next section
MG-REM1
Four-button Remote Control
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

Comentarios a estos manuales

Sin comentarios