Digiplex DGP2-641BL Manual de instalación descargar pdf (Pagina 6)

6 - Digiplex Modules Programming Guide

† Section/option is only available with DGP2-641R/RB.

‡ Section/option is only available with DGP2-641/BL

† Section/option is only available with DGP2-641R/RB.

Section [510]: Download from Memory Key (PMC-3) to DGP2-641R/RB.

Section [520]: Upload from DGP2-641R/RB to Memory Key (PMC-3).

‡ Section/option is only available with DGP2-641/BL.

Only Event Groups 000 to 055 and 070 can be used to program the module’s PGM. Refer to Appendix 1: Programming PGMs on page 41

for the PGM Table.

SECTION [006]: General Options 3 †

Option OFF ON † Section/option is only available with DGP2-641R/RB.

* This option cannot be turned ON and will

always remain OFF.

[1] Card Activates Door Unlocked Schedule N Disabled.

U 1 second

[2] Door Left Open Alarm

Disabled

N Enabled

[3] Door Forced Open Alarm

Disabled

N Enabled

[4] PIN Entry on Keypad

U Enabled *

[5] Keypad Tamper

U Disabled

N Enabled

[6]

Relock Door

U Disabled

N Enabled

[7]

Future Use N N/A N N/A

[8]

Unlock on REX

U Disabled

N Enabled

Section Data Description Default

[007] __/__/__ (005 to 255 seconds) Confidential Mode Timer 120

[008] __/__/__ (000 to 255; see option [3] in section [006])PGM Timer ‡ 005

[008] __/__/__ (000 to 255 seconds) Door Unlocked Period † 005

[009] __/__/__ (000 to 255 seconds added to section [008]) Door Unlocked Period Extension † 015

[010] __/__/__ (000 to 255 seconds) Door Left Open Interval † 060

[011] __/__/__ (000 to 25 seconds) Door Left Open Pre-Alarm Timer † 015

[012] __/__/__ (000 to 25 seconds) Beep Timer for Door Left Open Alarm † 005

[013] __/__/__ (000 to 25 seconds) Beep Timer for Door Forced Open Alarm † 005

Section [017] Door Unlocked Schedule †

Start Time End Time Days (turn ON or OFF)

SMTWTFSH

Schedule A: ___ ___ : ___ ___ ___ ___ : ___ ___ 12345678

Schedule B: ___ ___ : ___ ___ ___ ___ : ___ ___ 12345678

Event Group Feature Group Start # End #

Section Section Section Section

PGM Activation [009]‡ __/__/__ [010]‡ __/__/__ [011]‡ __/__/__ [012]‡ __/__/__

PGM Deactivation [013]‡ __/__/__ [014]‡ __/__/__ [015]‡ __/__/__ [016]‡ __/__/__

Message Programming

Each section from [101] to [148], [200] to [204] and [301] to [396] contains one message with a maximum of 16 characters. The sections contain the

following messages:

Sections [101] to [148] = “Zone 01” to “Zone 48” respectively

Section [200] = “Paradox Security”

Sections [201] to [204] = “First Area”, “Second Area”, “Third Area”, and “Fourth Area”

Sections [301] to [396] = “Code 01” to “Code 96” respectively

After entering the section corresponding to the desired message, the message can be re-programmed to suit your installation needs as detailed in Table 1.

For example, section [101] “Zone 01” can be changed to “FRONT DOOR”.

1 2 3 4 5 6 7 8 9 10 11 ... 47 48

Comentarios a estos manuales

Sin comentarios

Digiplex DGP2-641BL Manual de instalación Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digiplex DGP2-641BL