Digiplex DGP-641 Manual de usuario descargar pdf (Pagina 10)

8 User’s Manual

2.0 PROGRAMMING USER ACCESS CODES

Access Codes allow access the system. These codes can be

programmed to permit access to all or some features and areas.

Only the options related to the Access Control feature will be

explained in this manual. For details concerning User Access

Code features, see the Digiplex LCD Keypad User’s Manual.

In addition to programming the User Code, the User Options and

the Area Assignment on User Access Codes, the following

options can be programmed when Access Control is enabled on

the Digiplex system: Access Level, Schedule, Access User

Options, and Access Control Card. You can only program these

options with the System Master Code or User Access Codes with

the Full Master feature enabled and only when using an Access

Control Keypad.

The System Master Code has access to all Access

Control Doors and all Access Control features at all

times. Only the card’s serial number and the choice of

arming method can be changed. If the other options

are manually changed, the System Master Code will

immediately revert to its original programming.

2.1 ACCESS C ONTROL OPTIONS

2.1.1 Access Level and Schedule Assignment

Once you program the User Code, User Options and Area

Assignment, the Level & Schedule screen is displayed. Access

Levels and Schedules are explained in section 1.1 on p. 3.

ACCKEU00.fm Page 8 Wednesday, November 24, 1999 11:05 AM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 40 41

Sin comentarios

Digiplex DGP-641 Manual de usuario Pagina 10