Digiplex DGP-641 Especificaciones descargar pdf (Pagina 15)

14 Installer’s Guide

5.0 PGM PROGRAMMING

5.1 PGM STATE

Section 005: Option [1]

The keypad's on-board PGM can be set as normally open or

normally closed. When an open PGM is activated, it will close the

circuit from ground and enable any devices connected to it. When a

closed PGM is activated, it will open the circuit and disable any

devices connected to it. When the PGM Activation Event occurs (see

section 5.2 of this manual), the PGM will switch to its opposite state

(i.e. open to closed or closed to open).

Option [1] OFF = PGM is Normally Open (default)

Option [1] ON = PGM is Normally Closed

The PGM can provide 50mA to any device connected to it.

5.2 PGM ACTIVATION EVENT

Section 008

The PGM Activation Event determines which event(s) will activate

the keypad's on-board PGM. For details on the available activation

events, refer to the PGM Programming Table in the Digiplex

Programming Guide.

1) In section [008], key in the first digit where each digit from 8 to F

represents an event group (0 = PGM Disabled). The first digit

cannot be a value from 1 to 7.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22

Sin comentarios

Digiplex DGP-641 Especificaciones Pagina 15