Digiplex DGP-641 Especificaciones

DGP-641 LCD Keypad (V1.3)Installer’s Guide DGP-641

Digiplex LCD Keypad 9n4.0 SYSTEM OPTIONS4.1 PARTITION ASSIGNMENT Section 001: Options [1] to [4] Each keypad in the Digiplex system can be assigned to

10 Installer’s Guide4.4 DISPLAY ENTRY DELAY TIMERSection 002: Option [3]Based on the user's needs, an Entry Delay Timer will be programmed toprov

Digiplex LCD Keypad 11nSection [002]:Option [4] OFF = Normal Mode (default)Option [4] ON = Confidential Mode Option [5] OFF = LCD screen activated by

12 Installer’s Guide4.7 BEEP ON EXIT DELAY Section 003: Option [2] The keypad can beep once every second during the Exit DelayTimer. During the final

Digiplex LCD Keypad 13nThe intermittent beep will be re-initialized whenever the troublecondition re-occurs. Option [1] OFF = Beep disabled: System Tr

14 Installer’s Guide5.0 PGM PROGRAMMING5.1 PGM STATE Section 005: Option [1] The keypad's on-board PGM can be set as normally open ornormally clo

Digiplex LCD Keypad 15n2) Then enter the second digit, which can be any digit from 0 to Fdepending on the first digit chosen. 3) After entering the se

16 Installer’s Guide5.5 PGM TIMERSection 007If the keypad's on-board PGM is in PGM Timed Mode, the valueprogrammed in section [007] represents

Digiplex LCD Keypad 17n6.0 MESSAGE PROGRAMMING Sections 101 to 249Each section from [101] to [249] contains one message with amaximum of 16 characte

18 Installer’s Guide[STAY] - Insert SpacePressing the [STAY] key inserts a blank space in the current cursor position.[FORCE] - DeletePressing the [F

Digiplex LCD Keypad 1nTABLE OF CONTENTSINTRODUCTION ...3Specifications ...

Digiplex LCD Keypad 19nTable 2: Special Characters Catalog

20 Installer’s GuideWarrantyThe Seller warrants its products to be free from defects in materialsand workmanship under normal use for a period of one

2 Installer’s GuideBeep on Trouble ...12Keypad Tamper Enable ...

Digiplex LCD Keypad 3n1.0 INTRODUCTIONThank you for choosing Paradox® Security Systems. The Digiplex™Security System is an advanced technology securit

4 Installer’s Guide2.0 INSTALLATION2.1 CONNECTING THE KEYPADThe Digiplex™ LCD keypads are connected to the control panel'sbus in a star and/or da

Digiplex LCD Keypad 5n2.3 PROGRAMMABLE OUTPUT (PGM)Each keypad has one on-board PGM. A PGM is a programmableoutput that toggles to its opposite state

6 Installer’s Guide3.0 PROGRAMMING Programming the DGP-641 LCD keypad is simple. Enter the "ModuleProgramming Mode", enter the desired sect

Digiplex LCD Keypad 7nFigure 3.1: Module Programming Mode

8 Installer’s Guide3.2 PROGRAMMING METHODS3.2.1 Feature Select ProgrammingProgram sections [001] to [005] by enabling or disabling options.Within th